Pure Steam Generator, Gujarat, India.

Pure Steam Generator

The SA Pharma Process Equipment’s Pure Steam Generator produces clean, dry, pyrogen-free steam from purified water for the most critical uses in pharmaceutical, biopharmaceutical and medical device manufacturing. Every unit is designed to cGMP principles, so the steam that reaches your autoclaves, bioreactors, vessels and transfer lines never introduces particles, endotoxins or chemical additives into your process.

Unlike plant (utility) steam, which is generated in carbon-steel boilers and treated with corrosion inhibitors and amines, pure steam is generated from purified water in a fully stainless-steel, additive-free system. When condensed, it meets the same chemical and endotoxin limits as Water for Injection,which is why regulators expect it wherever steam contacts product, product-contact surfaces or sterile packaging.

What is a pure steam generator?

A pure steam generator (also called a clean steam generator or PSG) is a single-stage evaporator that converts pretreated feed water into saturated steam and then removes entrained water droplets, which can carry endotoxins, particles and dissolved solids. The result is steam that:

  • Contains no boiler additives or volatile amines.
  • Is free of bacterial endotoxins (pyrogens) to WFI limits when condensed.
  • Has controlled non-condensable gas, dryness and superheat values suitable for steam sterilization.
  • Can be validated, sampled and documented to GMP requirements.

How a pure steam generator works

The working principle is straightforward, but the quality depends on how well each stage is designed and controlled.

  • Feed water supply: Purified water (PW) or high-quality RO/EDI water enters through a feed pump and, on most designs, passes a preheater that recovers heat from the blowdown.
  • Evaporation: In the evaporator, plant steam, electric heaters or thermal oil on the primary side boil the feed water on the clean side. Primary and pure-steam sides are fully separated, typically with double tube sheets so a leak cannot cross-contaminate the clean side.
  • Droplet separation: The rising steam passes through a separation stage (gravity and centrifugal separation, depending on design) that removes water droplets carrying endotoxins and dissolved impurities.
  • Blowdown: Impurities concentrate in the remaining water, which is discharged through continuous or intermittent blowdown to keep the evaporator clean.
  • Pure steam outlet and control: Pressure control maintains a stable supply to the distribution loop; an integrated sample cooler lets operators collect condensate for online conductivity and laboratory testing (TOC, endotoxin, microbial).
Pure Steam Generator

Feed water is preheated and boiled; the separator strips droplets so only clean steam leaves, while impurities exit with the blowdown.

Key features and benefits

Pharmaceutical-grade construction

  • All pure-steam and feed-water contact parts in 316L stainless steel; primary side in 316L or 304 depending on heating medium
  • Internal surfaces mechanically polished and electropolished to Ra ≤ 0.4 µm,
  • Orbital welding with weld logs, weld maps and borescope inspection records
  • Hygienic tri-clamp or orbital-welded connections, fully drainable design with no dead legs

Consistent steam quality

  • Efficient multi-stage separation for low endotoxin and droplet carry-over
  • Steam quality tested to EN 285 for non-condensable gases, dryness value and superheat
  • Online condensate conductivity monitoring with alarm and automatic divert option
  • Integrated sample cooler for routine WFI-specification testing

Smart, compliant automation

  • PLC with colour touchscreen HMI and recipe-free, one-touch operation
  • 21 CFR Part 11 / EU GMP Annex 11-ready: user access levels, electronic records and audit trail
  • Trending of pressure, level, conductivity and temperature; SCADA/BMS integration over Ethernet/IP, Profinet or Modbus TCP

Efficient and reliable operation

  • Feed-water preheating with blowdown heat recovery to cut energy use
  • Stable outlet pressure under fluctuating demand
  • Compact skid footprint with front access for maintenance
  • Low blowdown rate to save water

Pure steam quality and compliance

Pure steam must meet two sets of requirements: its condensate must meet WFI chemistry and endotoxin limits, and the steam itself must have the physical properties needed for effective sterilization.

Parameter Requirement
Conductivity of condensate ≤ 1.3 μS/cm at 25 °C
Total organic carbon (TOC) ≤ 500 ppb (μg/L)
Bacterial endotoxins < 0.25 EU/mL
Microbial count (condensate) ≤ 10 CFU/100 mL
Non-condensable gases ≤ 3.5 mL gas per 100 mL condensate
Dryness value ≥ 0.95

Technical Specifications

The values below are typical ranges for this class of equipment. Replace them with your model-specific figures.

Parameter Specification
Pure steam capacity 100 to 3,000 kg/h (custom capacities on request)
Pure steam outlet pressure Up to 3.5 bar, adjustable
Heating medium Plant steam, electric, or thermal oil
Plant steam pressure (if steam heated) 5 to 8 bar
Feed water quality Purified water to USP / Ph. Eur., or RO/EDI water (conductivity ≤ 5 μS/cm)
Contact material AISI 316L, Ra ≤ 0.4 μm
Non-contact material AISI 304
Separation Gravity + centrifugal
Control system PLC + 10″ HMI, Part 11-ready
Instrumentation Pressure, level, temperature, condensate conductivity, sample cooler
Power supply 415 V, 3-phase, 50 Hz (other voltages available)

Applications

Our pure steam generators supply steam wherever it touches product, product-contact surfaces or sterile packaging.

  • Steam sterilizers and autoclaves: porous loads, equipment parts, garments and components.
  • Sterilization-in-place (SIP): process vessels, WFI and PW storage tanks, distribution loops and transfer lines.
  • Bioreactors and fermenters: vessel and line sterilization between batches.
  • Lyophilizers (freeze dryers): chamber and condenser SIP.
  • Filtration and filling equipment: filter housings and filling-line SIP.
  • Cleanroom humidification: clean, additive-free steam for HVAC humidifiers in Grade A to D areas.

Industries served: pharmaceutical formulations, injectables and parenterals, biotechnology and vaccines, API manufacturing, medical devices, hospitals and CSSDs, cosmetics and nutraceuticals.

Validation and documentation support

We deliver a complete validation package so your equipment can be qualified quickly and audited with confidence.

  • User requirement review and Design Qualification (DQ).
  • Functional and design specifications with a traceability matrix.
  • IQ/OQ protocols and on-site execution support.
  • Material test certificates, surface roughness reports, passivation and weld documentation.
  • P&IDs, GA drawings, electrical drawings, instrument calibration certificates, O&M manuals and spare parts lists.